Implementing Statistical Quality Control of refrigerator lamp cover production lines in a plastic injection molding company (Case Study: CV. ABC)

Shafira Eka Nuryanti, R.B. Seno Wulung

Abstract


This research intends to detect the existence of uncontrolled quality control in plastic injection molding companies, with refrigerator lamp cover products. Quality control is conducted using the statistical quality control (SQC) method with tools such as check sheets, histograms, and control charts. Check sheets and histograms were used to make it easier to present the data for further analysis. Furthermore, a control chart was used to detect whether the cacative product was still under statistical control or not. The result of the analysis using the p control chart indicated that there was a production process in an uncontrolled state on the 11th day of the production process. The x-chart and R-chart control charts didn't need to be revised because the production was still within the control limits. Therefore, Cp values = 0.3665<1.33 and Cpk = 0.2819<1.33 indicate that the company’s process capability is not good. Therefore, it is suggested that the company take immediate action to solve the problem. By utilizing this research, the injection molding company can take preventive and corrective action in the early stages.  


Keywords


Injection Molding; Product defect ; Quality Control ; Statistical Quality Control;

Full Text:

PDF

References


Anasagasti. (2013). Kimia Polimer. Encephale.

Bottani, E., Montanari, R., Volpi, A., Tebaldi, L., & Maria, G. Di. (2021). Statistical Process Control of assembly lines in a manufacturing plant: Process Capability assessment. Procedia Computer Science. https://doi.org/10.1016/j.procs.2021.01.353

Bryce, D. M. (1996). Plastic Injection Molding (Volume I M). Society Of Manufacturing Engineers (SME).

Fadhilah, H. A., & Wahyudi, W. (2022). Analisa Pengendalian Kualitas Produk Packaging Karton Box PT. X dengan Menggunakan Metode Statistical Quality Control (SQC). Jurnal Serambi Engineering, 7(2), 2948–2953. https://doi.org/10.32672/jse.v7i2.3987

Gaspersz, V. 2002. (2002). Pedoman implementasi program six sigma terintegrasi dengan ISO 9001: 2000, MBNQA, dan HACCP. PT. Gramedia Pustaka Utama, Jakarta.

Kemenperin. (2022). Indonesia Masuk Kategori Negara Industri. Kemenprin.Go.Id. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiBv8ap0M__AhULzjgGHbyVDKgQFnoECA4QAQ&url=https%3A%2F%2Fkemenperin.go.id%2Fartikel%2F18473%2FIndonesia-Masuk-Kategori-Industri&usg=AOvVaw28WMDp1xeOFLgZTZv8g9VM&opi=899

Marriauwaty, D., & Fajrah, N. (2020). Analisis Pengendalian Kualitas Produk Kapasitor Pada Pt Xyz Batam. Journal of Industrial Engineering & Management Research (JIEMAR).

McComb, M. A. (2008). The Quality Toolbox. Technometrics. https://doi.org/10.1198/tech.2008.s900

McCue, J. D., Beck, A., & Smothers, K. (2009). Quality Toolbox. Journal for Healthcare Quality. https://doi.org/10.1111/j.1945-1474.2009.00008.x

Montgomery, D. C. (2009). Introduction to Sixth Edition Statistical Quality Control 6th edition (six editio). John Wiley&Sons Inc.

Pavletic, D., Sokovic, M., & Paliska, G. (2008). Practical Application of Quality Tools. International Journal for Quality Research.

Pearn, W. L., & Wu, C. W. (2006). Critical acceptance values and sample sizes of a variables sampling plan for very low fraction of defectives. Omega. https://doi.org/10.1016/j.omega.2004.08.001

Puspita, R. (2013). Acceptance Sampling Plans Untuk Mengendalikan Kualitas Produk Pada PT. Bridgestone Sumatera Rubber Estate. Malikussaleh Industrial Engineering Journal, 2(1), 14–17.

Starzyńska, B., Kujawińska, A., Górski, F., & Buń, P. (2022). VIRTUAL QUALITY TOOLBOX AS AN INNOVATIVE SOLUTION SUPPORTING LIFELONG LEARNING. International Journal for Quality Research. https://doi.org/10.24874/IJQR16.04-03

Stuart, M., Mullins, E., & Drew, E. (1996). Statistical quality control and improvement. In European Journal of Operational Research. https://doi.org/10.1016/0377-2217(95)00069-0

Tague, N. R. (2005). The Quality Toolbox - Second Edition. In Technometrics.

Zhu, Y., Hu, P., Li, X., Tian, Y., Bai, X., Liang, T., & Li, J. (2023). An End-to-End Data-Adaptive Pancreas Segmentation System with an Image Quality Control Toolbox. Journal of Healthcare Engineering. https://doi.org/10.1155/2023/3617318




DOI: https://doi.org/10.31764/protech.v3i1.15310

Refbacks

  • There are currently no refbacks.


Protech Biosystems Journal is indexing in the following databases:

    

 

Editorial Office: