Identification of ergonomic risks using the Nordic Body Map (NBM) method for tofu production workers in the Abian Tubuh Kota Mataram
Abstract
Humans as workers play an important role in producing tofu products in quality and quantity. Making production room facilities needs good arrangement so that workers do not feel risks or complaints while carrying out activities. The purpose of this research was to help the level of complaints felt by workers in the production of tofu using the Nordic Body Map (NBM) method. The method used in this study was a descriptive method by exploring problems using a questionnaire to get 4 categories of complaint levels, namely not sick, slightly sick, sick, and very sick. There were 8 subjects studied consisting of 4 male workers and 4 female workers with a minimum working period of 5 years. The results and discussion show that the work station for making tofu needs rearrangement to facilitate moving from one station to the next work station, and found complaints felt by workers with a total score in the range of 63% -88% (high risk) in the upper neck , left and right shoulder, right wrist, right upper arm, waist, left and right ankle and left and right leg so that a comprehensive action is needed to be corrected immediately
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Akh. Sokhibi, F. A. N. (2022) ‘Analisis Postur Kerja Karyawan Pemindahan Beam Benang Dengan Metode Reba Pada Divisi Persiapan Pt Sukuntex’, Journal of Industrial Engineering and Technology. doi: 10.24176/jointtech.v2i1.7434.
Aulia, R., Ginanjar, R. and Fathimah, A. (2019) ‘Analisis Risiko Ergonomi Terhadap Keluhan Musculoskeletal Disorders (Msds) Pada Pekerja Konveksi Di Kelurahan Kebon Pedes Kota Bogor Tahun 2018’, Promotor. doi: 10.32832/pro.v2i4.2243.
Bevan, S. (2015) ‘Economic impact of musculoskeletal disorders (MSDs) on work in Europe’, Best Practice and Research: Clinical Rheumatology. doi: 10.1016/j.berh.2015.08.002.
Chin, J. et al. (2019) ‘Workload Analysis by Using Nordic Body Map, Borg RPE and NIOSH Manual Lifting Equation Analyses: A Case Study in Sheet Metal Industry’, in Journal of Physics: Conference Series. doi: 10.1088/1742-6596/1424/1/012047.
Fathimahhayati, L. D., Amelia, T. and Syeha, A. N. (2019) ‘Analisis Beban Kerja Fisiologi pada Proses Pembuatan Tahu Berdasarkan Konsumsi Energi (Studi Kasus: UD. Lancar Abadi Samarinda)’, Jurnal INTECH Teknik Industri Universitas Serang Raya. doi: 10.30656/intech.v5i2.1695.
Muanah, M., Faiz Syuaib, M. and Liyantono, L. (2019) ‘Pendekatan Ekonomi Ergonomika Untuk Perancangan Optimal Tenaga Kerja Dan Mekanisasi Pada Produksi Beras Organik’, Jurnal Agrotek Ummat. doi: 10.31764/agrotek.v6i1.828.
Muanah, M., Huda, A. A. and Suwati, S. (2021) ‘Analisis Ergonomika Lingkungan Fisik Ruang Produksi Tahu terhadap Tingkat Keamanan dan Kenyamanan Pekerja di Kelurahan Abian Tubuh Kota Mataram’, Jurnal Keteknikan Pertanian Tropis dan Biosistem. doi: 10.21776/ub.jkptb.2021.009.02.10.
Prakoso, G., Iridiastadi, H. and Saparina, E. N. (2019) ‘Musculoskeletal disorders analyzing of air cleaner assembly operators using Nordic body map in excavator manufacturer in Indonesia’, Operations Excellence: Journal of Applied Industrial Engineering. doi: 10.22441/oe.v11.2.2019.026.
Purba, Y. S. and Lestari, P. W. (2021) ‘Berat beban tas dengan keluhan musculoskeletal pada siswa SMA’, Holistik Jurnal Kesehatan. doi: 10.33024/hjk.v14i4.3061.
Rahdiana, N. (2018) ‘Identifikasi Risiko Ergonomi Operator Mesin Potong Guillotine Dengan Metode Nordic Body Map (Studi Kasus DI PT. XZY)’, Industry Xplore. doi: 10.36805/teknikindustri.v2i1.185.
Rayyani, L. et al. (2020) ‘Gambaran Postur Kerja dan Keluhan Muskuloskeletal pada Pegawai Tata Laksana di Universitas Islam Bandung’, Jurnal Integrasi Kesehatan & Sains. doi: 10.29313/jiks.v2i1.4342.
Setyanto, N. W. et al. (2015) ‘Ergonomics analysis in the scarfing process by owas, nios and nordic body map’ s method at slab steel plant’ s division’, international Journal of Innovative Research in Science, Engineering and Technology.
Syamsir, D. C. and Sarvia, E. (2018) ‘Perancangan Mesin ATM dan Ruangan ATM Berdasarkan Ilmu Ergonomi (Studi Kasus di ATM “Bank A†Setrasari, Bandung)’, Journal of Integrated System. doi: 10.28932/jis.v1i1.988.
Taofik, I. M. and Mauluddin, Y. (2015) ‘Evaluasi Ergonomi Menggunakan Metode Rula (Rapid Upper Limb Assessment) Untuk Mengidentifikasi Alat Bantu Pada Mesin Roasting Kopi’, Jurnal Kalibrasi. doi: 10.33364/kalibrasi/v.13-1.204.
Ula, L. H., Permai, N. M. S. Y. and Utami, H. H. (2020) ‘Analisis Risiko Produksi Daun Teh Basah Berdasarkan Pemetikan Mekanik Dan Manual Pada Pt Perkebunan Nusantara Ix Kebun Semugih Kabupaten Pemalang’, Jurnal Dinamika Sosial Ekonomi. doi: 10.31315/jdse.v20i1.3253.
Yuslistyari, E. I. and Setianah, P. (2018) ‘Analisis Perbaikan Postur Kerja Dengan Pendekatan Ergonomi Pada Home Industry Jks Snack & Catering Di Serang-Banten’, Journal Industrial Manufacturing. doi: 10.31000/jim.v3i1.620.
DOI: https://doi.org/10.31764/jau.v10i1.12513
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Suwati, Muanah, Huda, Gunawan, Wahyuni, & Basirun
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| |||
|
Alamat Kantor