PERUBAHAN SIFAT FISIK DAN CITA RASA KOPI ARABIKA ASAL BONDOWOSO PADA BERBAGAI TINGKAT PENYANGRAIAN

Hasbi Mubarak Suud; Dyah Ayu Savitri; Safa Rajni Ismaya

doi:10.31764/jau.v8i2.5238

PERUBAHAN SIFAT FISIK DAN CITA RASA KOPI ARABIKA ASAL BONDOWOSO PADA BERBAGAI TINGKAT PENYANGRAIAN

Hasbi Mubarak Suud, Dyah Ayu Savitri, Safa Rajni Ismaya

Abstract

Arabica coffee from the plantation on the foothill of Ijen-Raung mountains in Bondowoso is well known for its Java Arabica Coffee specialty. The exploration to strengthen the specialty identity is keep going on. This study aims to determine the changes in physical properties and flavor of that arabica coffee during roasting at various times and temperatures of roasting. The aspects of physical properties that were studied include weight to volume ratio, coffee bean dimension, and a color index of RGB (red green blue). The weight-to-volume ratio and color index of RGB decreased as the time and temperature roasting increased. The change in dimension of the coffee bean was caused by roasting also detected, but not dominant signifies the roasting level. This is due to the dimension change of coffee bean in each roasting profile having tiny differences and the dimension of the green bean had high variation. Based on this study, it is known that the roasting with a maximum temperature of 165°C and total time process of 9.5 minutes gives the highest total score of aroma, flavor, acidity, and aftertaste of that arabica coffee.

Keywords

Arabica Coffee; Flavor; Java Arabica Coffee; Physical Properties; Roasting

Full Text:

PDF

References

Agustini, S. (2020) ‘perubahan sifat fisika kimia kopi robusta asal semendo pada berbagai level penyangraian’, Jurnal Dinamika Penelitian Industri, 31(1), p. 79. doi: 10.28959/JDPI.V31I1.6144.

Amri, A. F. et al. (2020) ‘identifikasi profil kualitas kopi sebagai acuan pengembangan produk spesialti di kawasan menoreh, kulon progo, yogyakarta’, Jurnal Industri Hasil Perkebunan, 15(1), pp. 17–28. Available at: http://litbang.kemenperin.go.id/bbihp/article/view/5776 (Accessed: 30 August 2021).

Anisa, A., Solomon, W. K. and Solomon, A. (2017) ‘Optimization of roasting time and temperature for brewed hararghe coffee (Coffea Arabica L.) using central composite design’, International Food Research Journal 2, 24(6), pp. 2285–2294. Available at: https://www.researchgate.net/publication/343648384_Optimization_of_roasting_time_and_temperature_for_brewed_hararghe_coffee_Coffea_Arabica_L_using_central_composite_design (Accessed: 31 August 2021).

Bustomi, M. A. and Dzulfikar, A. Z. (2014) ‘Analisis Distribusi Intensitas RGB Citra Digital untuk Klasifikasi Kualitas Biji Jagung menggunakan Jaringan Syaraf Tiruan’, Jurnal Fisika dan Aplikasinya, 10(3), pp. 127–132. doi: 10.12962/J24604682.V10I3.791.

Edzuan, A. M. F., Majid, N. A. A. and Bong, H. L. (2015) ‘Physical and Chemical Property Changes of Coffee Beans during Roasting’, American Journal of Chemistry, 5(3A), pp. 56–60. doi: 10.5923/C.CHEMISTRY.201501.09.

Folmer, B. (2017) The Craft and Science of Coffee. 1st edn. London: Academic Press.

Jokanović, M. R. et al. (2012) ‘Changes of physical properties of coffee beans during roasting’, Acta Periodica Technologica, 43, pp. 21–31. doi: 10.2298/APT1243021J.

Münchow, M. et al. (2020) ‘Roasting Conditions and Coffee Flavor: A Multi-Study Empirical Investigation’, Beverages 2020, Vol. 6, Page 29, 6(2), p. 29. doi: 10.3390/BEVERAGES6020029.

Nuraniza, N., Lapanporo, B. P. and Arman, Y. (2013) ‘Uji Kualitas Minyak Goreng Berdasarkan Perubahan Sudut Polarisasi Cahaya Menggunakan Alat Semiautomatic Polarymeter’, PRISMA FISIKA, 1(2), pp. 87–91. doi: 10.26418/PF.V1I2.3014.

Permatasari, P. C. (Prisca), Basith, A. (Abdul) and Mulyati, H. (Heti) (2018) ‘Model Bisnis Inklusif Rantai Nilai Kopi Arabika di Bondowoso Jawa Timur’, Jurnal Manajemen Teknologi, 17(2), pp. 111–125. doi: 10.12695/JMT.2018.17.2.3.

Pimenta, t. V. Et al. (2009) ‘roasting processing of dry coffee cherry: influence of grain shape and temperature on physical, chemical and sensorial grain properties’, Boletim do Centro de Pesquisa de Processamento de Alimentos, 27(1), pp. 97–106. doi: 10.5380/CEP.V27I1.14956.

Pittia, P., Dalla Rosa, M. and Lerici, C. R. (2001) ‘Textural Changes of Coffee Beans as Affected by Roasting Conditions’, LWT - Food Science and Technology, 34(3), pp. 168–175. doi: 10.1006/FSTL.2000.0749.

Prabowo, D. A. and Abdullah, D. (2018) ‘Deteksi dan Perhitungan Objek Berdasarkan Warna Menggunakan Color Object Tracking’, Pseudocode, 5(2), pp. 85–91. doi: 10.33369/PSEUDOCODE.5.2.85-91.

Rao, S. (2014) The Coffee Roaster’s Companion by Scott Rao. first edition. Available at: https://www.scottrao.com/ (Accessed: 9 June 2021).

Rodrigues, M. A. A. et al. (2002) ‘Evolution of physical properties of coffee during roastin’, pp. 1-. doi: 10.13031/2013.9759.

SCAA (2015) SCAA Protocols | Cupping Specialty Coffee. Available at: https://www.scaa.org/PDF/resources/cupping-protocols.pdf (Accessed: 15 May 2021).

DOI: https://doi.org/10.31764/jau.v8i2.5238