UTILIZATION OF CHARCOAL BRIQUETTE PRINTING MACHINES IN WOOD CHARCOAL CRAFTSMEN AS AN EFFORT TO IMPROVE ECONOMIC EMPOWERMENT
Abstract
In Dawuhan village, Grujugan District, Kab. Bondowoso has a number of wood charcoal Micro, Small and Medium Enterprises (MSMEs), but the production equipment is still simple. The sizes of charcoal produced by MSME partners are usually classified into three A, B and C. Type C wood charcoal is usually thrown away. Currently there are efforts from partners to change the production of class B and C charcoal into charcoal briquettes. However, briquette printing is still done manually, so problems arise due to limited energy and time. The focus of this service is to overcome the limitations of knowledge and technology experienced by a partner named Bpk. Sahawi with methods of providing guidance and counseling as well as providing a charcoal briquette printing machine. There were 20 people involved and evaluations were carried out directly or indirectly. The results of service activities show an increase in human resources for wood charcoal craftsmen through counseling and training by 80%.
Full Text:
PDFReferences
Akande, O. M., & Olorunnisola, A. O. (2018). Potential of Briquetting as a Waste-Management Option for Handling Market-Generated Vegetable Waste in Port Harcourt, Nigeria. Recycling, 3(2), 11. https://doi.org/10.3390/recycling3020011
Anderson, J., Helwani, Z., Jurusan Teknik Kimia, M. S., Jurusan Teknik Kimia, D., Jurusan Teknik Kimia Fakultas Teknik, D., Riau Kampus Binawidya Km, U., & Baru Panam, S. (2017). PROSES DENSIFIKASI PELEPAH SAWIT MENGGUNAKAN GLISEROL SEBAGAI FILLER MENJADI BAHAN BAKAR PADAT. In Jom FTEKNIK (Vol. 4, Issue 1).
Bhatkar, O. P., Patil, S. S., Tambe, S. P., Wafelkar, N. N., & Manjarekar, P. P. (2017). Design and Fabrication of Densified Biomass Briquette Maker Machine. International Journal of Environment, Agriculture and Biotechnology, 2(2), 805–807. https://doi.org/10.22161/ijeab/2.2.30
Budi, E. (2017). Pemanfaatan Briket Arang Tempurung Kelapa Sebagai Sumber Energi Alternatif. Sarwahita, 14(01), 81–84. https://doi.org/10.21009/sarwahita.141.10
Digdo, I., & Setiawan, L. (2014). TEKNOLOGI PEMBUATAN BRIKET AMPAS TEBU DAN SERBUK GERGAJIAN KAYU SEBAGAI BAHAN BAKAR ALTERNATIF YANG RAMAH LINGKUNGAN.
Fadeyibi, A., & Adebayo, K. R. (2021). Development of a dually operated biomass briquette press. Article in Songklanakarin Journal of Science and Technology, 43(3), 737–743. https://doi.org/10.14456/sjst-psu.2021.97
Kongprasert, N., Wangphanich, P., & Jutilarptavorn, A. (2019). Charcoal Briquettes from Madan Wood Waste as an Alternative Energy in Thailand. Procedia Manufacturing, 30, 128–135. https://doi.org/https://doi.org/10.1016/j.promfg.2019.02.019
Kusmartono, B., Situmorang, A., & Yuniwati, M. (2021). Pembuatan Briket Dari Tempurung Kelapa (Cocos Nucivera) Dan Tepung Terigu. Jurnal Teknologi, 14(2), 142–149. https://doi.org/10.34151/jurtek.v14i2.3770
Lafas. (2011). Lafas, dkk., 2011. Pembuatan Briket Arang Tempurung Kelapa Dari Sisa Bahan Bakar Pengasapan Ikan Keluragan Bandarharjo Semarang. [Thesis]. universitas diponegoro.
Maryono, Sudding, & Rahmawati. (2013). Pembuatan dan Analisis Mutu Briket Arang Tempurung Kelapa Ditinjau dari Kadar Kanji Preparation and Quality Analysis of Coconut Shell Charcoal Briquette Observed by Starch Concentration.
Nafie, A., Jasron, J. U., Tobe, A. Y., Program, ), & Mesin, S. T. (2023). Rancang Bangun Alat Pencetak Briket Dengan Sistem Hidrolik. LONTAR JURNAL TEKNIK MESIN UNDANA (LJTMU), 10(02), 1–7. http://ejurnal.undana.ac.id/index.php/LJTMU
Nugroho, T. A., Wicaksono, T. A., Kurniasih, F., & Satriawan, D. (2020). Kajian Pembuatan Briket Bioarang dari Sampah Kiriman Pantai Teluk Penyu, Cilacap. Prosiding Seminar Nasional Teknik Kimia “Kejuangan,” 1–5.
Obi O F, A. C. O. , O. W. I. (2013). Development of an Appropriate Briquetting Machine for Use in Rural Communities. International Journal of Engineering and Advanced Technology (IJEAT), 4(2), 578–582. https://www.ijeat.org/portfolio-item/D1465042413/
Okwu, M. O., & Omonigho, O. B. (2018). Development of a Light Weight Briquetting Machine for Small and Medium Scale Enterprise. FUPRE Journal of Scientific and Industrial Research, 2(1).
Parinduri, L., Parinduri, T., Kunci, K., Fosil, E., Biomassa, E., & Energi, K. (2020). Konversi Biomassa Sebagai Sumber Energi Terbarukan. In Journal of Electrical Technology (Vol. 5, Issue 2). https://www.dosenpendidikan.
Qistina, I., Sukandar, D., & Trilaksono, T. (2016). Kajian Kualitas Briket Biomassa dari Sekam Padi dan Tempurung Kelapa. Jurnal Kimia VALENSI, 0(0). https://doi.org/10.15408/jkv.v0i0.4054
Rezania, S., Md Din, M. F., Kamaruddin, S. F., Taib, S. M., Singh, L., Yong, E. L., & Dahalan, F. A. (2016). Evaluation of water hyacinth (Eichhornia crassipes) as a potential raw material source for briquette production. Energy, 111, 768–773. https://doi.org/https://doi.org/10.1016/j.energy.2016.06.026
Ristianingsih, Y., Mardina, P., Poetra, A., & Yosi Febrida. (2013). Pembuatan Briket Bioarang Berbahan Baku Sampah Organik Daun Ketapang Sebagai Energi Alternatif. Infoteknik, 14(1).
Refbacks
- There are currently no refbacks.